中文网站 English
EAGER-A1200 Crack Sealing MachineREEY Series Crack SealantRDSC0406C Synchronous Chip SealerRDS13 Slurry Seal EquipmentEAGER-LB4000 Asphalt Concrete Mixing Station
HOME / PRODUCTS / Pavement Pothole Repairing Equipments

EAGER Series Asphalt Concrete Recycling Machine

Collection

Other Products

Product introduction

EAGER Series Asphalt Concrete Recycling Machine heats quickly and evenly, can be used for a variety of emergency road works. The device can recycle the wasted asphalt mixture material, reduce the environment pollution of traditional construction, to achieve 100% of the original pavement materials recycling, and improve construction efficiency. 
The equipment is composed of trailer chassis, converter, engine, hydraulic system, combustion system, frame and electrical control system. The engine driven hydraulic pump provides hydraulic power for the machine. Hydraulic oil through control valve drives the converter to rotate, flip up and down operations. Wasted asphalt concrete in the process of rotating the converter, use diesel fuel burner as  heating fuel. Carefully designed the converter plate can be copied uniform mixing of asphalt concrete, fully heated. Fast and uniform heating. After 15-20 minutes of heating, melt the asphalt concrete can be used to fully repair the road. 
The machine is also equipped with a thermal heating of asphalt bitumen tank and spray system. When the waste asphalt concrete caused by decrease of asphalt content, you can add asphalt by pump the bitumen to the concrete storage tank. Then stir through a period of time to restore its bonding properties. 

Product Power
It adopts Japanese Yanmar 3TNV88 engine, provides power source for equipment. The engine also equipped with a 80 liter diesel tank, when the tank fully filled with diesel, can ensure the engine work more that 20 hours continuously.

Trailer and Support Body
This machine is self-propelled and trailer dual use type.
(For trailer-type) Trailer chassis design, hook height adjustable, adjusting the hook height make it fits to the tractor, tractor trailer using 5-tons or even more capacity truck, easy for construction, maximum tractor speed 80KM/H. Biaxial four structures, running smoothly, reduce the impact of the towing vehicle in front, improve the safety performance of high-speed traction. 
(For self-propelled type) The whole moving system is made up of traction bolt, steering wheel, manual transmission, brakes, and propulsion drive and other components. Easy steering wheel-operation, manual control advance, reversing and brake pedal, refers to automobile operating principle with more advanced humane design concepts. To control vehicle forward, backward through the buttons on the steering wheel. 

Asphalt Concrete Mixing System
Asphalt concrete mixing roller made by special steel, heat resistance and good weld-ability, corrosion resistance. Material mixing roller using diesel burner direct heating method, centralized control, high thermal efficiency. Intermittent heating control, convenient for temperature control, not burnt the asphalt material. Designed and installed mixing blade inside of material mixing roller, ensure that the asphalt concrete mixing process evenly flip, generally the material mixing or recycling time less than 20 minutes.

Asphalt Heating Tank and Conveying System
The system consists of asphalt heating tank, asphalt pump, transmission pipes and electric heaters etc. When lack of asphalt construction materials, can make supplement effectively.
Asphalt heating tank is for supply of recycled asphalt concrete, it is an important system component to ensure asphalt supplement, it has heating, storage, insulation, and direct transfer asphalt functions. Asphalt heating tank uses liquefied petroleum gas burner heating method, burner emitted heat through the heat pipe wall pass the heat energy to asphalt, and the waste heat emitted into the atmosphere through the exhaust flue, complete heat exchange, after asphalt melted, through the asphalt pump timely supply of asphalt material to the material mixing roller. Asphalt tank fitted with thermometer, easy to observe the temperature of the asphalt tank. With 5 cm thick insulation layer outside the tank to reduce the tank heating loss. Total volume of asphalt tank , can meet the continuous production of asphalt with maximum consumption a day.

Hydraulic Power Transmission System
Hydraulic system is composed of the fuel tank, hydraulic pump, hydraulic motor, converter and motor, hydraulic cylinder, control valve components. The hydraulic power station of the pump body adopts diesel engine driven hydraulic gear pump. 
Hydraulic valve actuator system, it is the core component of the hydraulic system. The main components of hydraulic equipment all used in famous international brands YUKEN, ensures the reliability of hydraulic system.

Control System
It controls the heating of asphalt material, asphalt heating temperature automatic control, automatic ignition. Control the converter work, stop. Control asphalt work to stop the pump. Control hydraulic system work.

Technical Parameters

EAGER-LZ1000/LZ1000Z

Power 

 

Engine

Japanese Yanmar 3TNV88, three cylinder diesel engine 

Power 

21KW

Furnace burner

 

Burner 

G10

Using energy

Diesel

Ignition way

Electronic pulse ignition

Roller

 

Maximum  recycled weight

800kg/furnace

Drum material volume

0.45 m3

Speed 

10-15r/min

Discharging methods

Hydraulic cylinder rotating discharge

Maximum elevation

50°

Maximum angle of depression

-30°

Material frying time

<20min

Control system 

 

Screen 

LED

External power supply

Mains supply

Control way 

Automatic control

Walking system

 

Walking mode 

Trailer/Trailer and self-propelled

Broke mode 

Oil broke

Hydraulic system

 

Hydraulic pump

Twofold-gang, 16/40mL/R

Emulsified asphalt supply system

 

Volume

60L

Asphalt supply system

 

volume

120L

Hydraulic power

Hydraulic drive, forced stirring

Heating mode of asphalt tank

Indirect heating through heat Conduction oil

Heat exchanging means

Circulation forced by conduction oil
















Place an online enquiry
Subject:
*(Required)
Description:
Contact Information:
Full Name:
Company:
Address:
Phone (Mobile Phone):
*(Required)
Fax:
E-mail:
MSN/SKYPE/QQ: